Exoproduction and Biochemical Characterization of a Novel Serine Protease from Ornithinibacillus caprae L9T with Hide-Dehairing Activity

This study is the first report on production and characterization of the enzyme from an Ornithinibacillus species. A 4.2-fold increase in the extracellular protease (called L9T) production from Ornithinibacillus caprae L9T was achieved through the one-factor-at-a-time approach and response surface methodological optimization. L9T protease exhibited a unique protein band with a mass of 25.9 kDa upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This novel protease was active over a range of pH (4–13), temperatures (30–80°C) and salt concentrations (0–220 g/l), with the maximal activity observed at pH 7, 70°C and 20 g/l NaCl. Proteolytic activity was upgraded in the presence of Ag+, Ca2+ and Sr2+, but was totally suppressed by 5 mM phenylmethylsulfonyl fluoride, which suggests that this enzyme belongs to the serine protease family. L9T protease was resistant to certain common organic solvents and surfactants; particularly, 5 mM Tween 20 and Tween 80 improved the activity by 63 and 15%, respectively. More importantly, L9T protease was found to be effective in dehairing of goatskins, cowhides and rabbit-skins without damaging the collagen fibers. These properties confirm the feasibility of L9T protease in industrial applications, especially in leather processing.

reducing contaminants in wastewater.
Over the past decades, the reported extracellular serine proteases have been principally derived from Bacillus strains; however, no attention has been paid to the rare species of the genus Ornithinibacillus. At the time of writing, the genus Ornithinibacillus comprises 12 species with validly published names [20], and its members are usually aerobic moderate halophiles. Despite these studies, no report exists on the enzymes from Ornithinibacillus strains, as far as the authors know. Thus, further studies on enzymes produced by Ornithinibacillus strains are highly desirable in order to expand the existing toolbox of industrial enzymes and to realize potential applications. Previous work scientifically classified an extracellular protease-producing strain as Ornithinibacillus caprae L9 T [21]. In view of the above, in this study, we adopted effective optimization strategies to improve the productivity of O. caprae L9 T protease. Meanwhile, the biochemical and molecular characteristics of the protease sample were studied. Further, the crude enzyme was used as a biocatalyst for the dehairing of animal hides to estimate its application potential in the leather industry.

Microorganism and Reagents
O. caprae L9 T , a moderately halophilic bacterium isolated from a goat hide [21], was deposited in the Korean Collection for Type Cultures (KCTC) and the laboratory of industrial biotechnology with the accession numbers KCTC 43176 and L9, respectively. Unless otherwise stated, all chemical reagents used in this work are analytically pure and obtained from several commercial companies, including Sangon Biotech (China), Sigma-Aldrich (USA), and Takara (Japan).

Genomic Analysis
The assembled genome of strain L9 T was submitted to GenBank with the accession number WOCA00000000. The phylogenetic tree of the genomes of strain L9 T and its related taxa was reconstructed using the Type Strain Genome Server (TYGS) [22]. Simultaneously, in order to assess the genetic diversity of strain L9 T , the DNA sequences were performed with BLASTX search against the non-redundant (NR) protein database [23].

Protease Activity Assay
The protease activity was determined according to the procedure GB/T 23527-2009 [24] stated by the National Standardization Administration of China (SAC) with slight modifications. The appropriately diluted enzyme solution (0.2 ml) was mixed with 0.2 ml of 20 g/l casein dissolved in Tris-HCl buffer (50 mM, pH 7). The mixture was then incubated for 10 min at 70°C, and the reaction was quenched by addition of 0.4 ml of 65.4 g/l trichloroacetic acid (TCA). After violent shaking, the precipitated proteins were eliminated by centrifugation at 12,000 ×g and 4 o C for 5 min. The resultant supernatant (0.4 ml) was then mixed with 2 ml of 42.4 g/l Na 2 CO 3 and 0.4 ml of 1 M Folin & Ciocalteu's phenol reagent. Later, the mixture was allowed to stand for 20 min at 40°C, and the absorbance was monitored at 680 nm against the control using a UV/Vis spectrophotometer. Additionally, a negative control was performed in the same way and the substrate was added after adding TCA. In consequence, one unit of proteolytic activity (U/ml) was defined as the amount of enzyme required to liberate 1 μg of tyrosine per minute under specified assay conditions.

Optimization of Protease Production by Strain L9 T
Strain L9 T was precultured for 12 h in Luria-Bertani broth supplemented with 100 g/l NaCl as a seed solution to inoculate (2%, v/v) the subsequent enzyme-producing fermentation medium. Thereafter, the effect of fermentation variables on the enzyme production of O. caprae L9 T was investigated using the one-variable-at-atime approach and response surface methodology (RSM). The three independent variables (carbon source, nitrogen source and initial pH) that had the most significant impact on protease production were selected. Later, the optimum concentration and interaction of these three factors for enhancing the protease production was studied by Box-Behnken design (BBD). Each factor was studied at three different levels: -1, 0 and +1 (Table S1). A set of 17 experiments was generated by design expert software (Table S2), in which 5 experiments were repeated at the central level to evaluate the linear and curvature effects of the variables. Accordingly, the proteolytic activity was designated as a response, and the regression analysis, response surface model and significance tests were performed using DesignExpert software (Stat-Ease, Inc., USA).

Partial Purification of Protease
O. caprae L9 T culture supernatant, containing secreted protease, was harvested through centrifugation at 8,000 ×g and 4 o C for 5 min, and then dialyzed in a dialysis bag (8 kDa MWCO) against repeated changes of Tris-HCl buffer (pH 7). The dialyzed sample was prepared, and stored at 0 o C for further analysis.

SDS-PAGE, Zymography and Mass Spectrometry
The purity and molecular weight of the enzyme were determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) according to the method of Laemmli [25] under denaturing conditions. In the meantime, the proteolytic activity was confirmed by zymography according to the method described by Garciacarreno et al. [26] with slight changes. Briefly, the enzyme sample, mixed with an equal volume of 2×SDS non-reducing loading buffer, without boiling, was electrophoresed at constant current. First, after electrophoresis, the gel was immersed in Tris-HCl buffer (50 mM, pH 7) supplemented with 2.5% (v/v) Triton X-100 to eliminate SDS. Second, the gel was washed twice in Tris-HCl buffer for 40 min with agitation to remove Triton X-100. Third, the hydrolysis reaction occurred inside the gel during incubation with 10 g/l casein at 40 o C for 12 h. Finally, the gel was stained with a dye solution consisting of 1 g/l Coomassie Brilliant Blue R-250, 8% (v/v) acetic acid and 25% (v/ v) ethanol for 12 h at room temperature. In general, the presence of a white band on a dark blue background indicates the existence of protease activity.
Thereafter, the area of active enzyme was extracted from the electrophoresis gel for reduction, alkylation, trypsin digestion, and desalting. The mixture containing peptides of different sizes was detected using liquid chromatography-tandem mass spectrometry (LC-MS/MS) at Sangon Biotech. Importantly, ProteinPilot software (version 4.5) was employed to retrieve the obtained peptide sequences in the GenBank database.

Biochemical Characterization
Determination of temperature on L9 T protease activity and stability. A range of various temperatures (30-80°C at 5°C intervals) was used to determine the optimum temperature, and the maximum enzyme activity was considered as 100% activity. Thermostability of L9 T protease was determined after incubation of the enzyme at 30-80 o C for 1 h. The residual enzymatic activities were measured at the optimal temperature, and the enzyme that had not been incubated served as the 100% control.
Effect of pH on L9 T protease activity and stability. The fermentation supernatant was dialyzed against Tris-HCl buffer (5 mM, pH 7) using an 8 kDa dialysis bag at 4°C for 24 h and the buffer was changed at 4 h intervals. Then, the dialyzed enzyme was diluted in several different pH buffers (pH 2-13) in order to estimate the impact of pH on proteolytic activity. Maximum enzyme activity for the buffer solution was considered as 100%. Five buffer systems (50 mM) including glycine-HCl (pH 2-4), CH 3 COONa-CH 3 COOH (pH 5-6), Tris-HCl (pH 7-9), glycine-NaOH (pH 10-11), and KCl-NaOH (pH 12-13) were used. Similarly, the pH stability was evaluated by preincubating the dialyzed enzyme in different pH buffers at 25°C for 1 h, and residual enzymatic activity was measured at pH 7 and 70 o C. The unincubated enzyme activity measured with Tris-HCl buffer (50 mM, pH 7) was considered as a control (100%).
Effect of NaCl on L9 T protease activity and stability. To investigate the effect of NaCl on proteolytic activity, the assay was performed at 70 o C with L9 T protease in the presence of varying salt concentrations (0-220 g/l). As for its salt tolerance, L9 T protease was pre-incubated in different salinities (0-220 g/l with an interval of 20 g/l) for 1 h prior to determination of remaining activities. The activity of L9 T protease in the absence of NaCl was calculated as 100%.
Effect of chemical agents on protease activity. The effects of various chemicals on protease catalysis were studied by pre-incubating L9 T protease for 1 h with each reagent. Dimethyl sulfoxide (DMSO), H 2 O 2 and nonionic surfactants, including Tween 20, Tween 80 and Triton X-100, were provided at the working concentration of 1% (v/v). Similarly, organic solvents, including acetone, benzene, ethanediol, ethanol, glycerol, n-hexane, isopropanol and methanol were evaluated at 5 and 10% (v/v), respectively. Other types of chemicals were used at a final concentration of 5 mM; reducing agents: dithiothreitol and β-mercaptoethanol; protease inhibitors: ethylene-diamine-tetraacetic acid (EDTA); phenylmethylsulfonyl fluoride (PMSF) and ethylene glycol-bis (βaminoethyl ether)-N,N,N' ,N'-tetraacetic acid (EGTA). The corresponding remaining activities were determined under the standard conditions, and the enzyme solution without any additives was set as a control.
Effect of different metal ions on protease activity. The effects of various monovalent (Li + , K + and Ag + ), divalent (Mg 2+ , Ca 2+ , Mn 2+ , Fe 2+ , Co 2+ , Cu 2+ , Zn 2+ , Sr 2+ and Ba 2+ ) and trivalent (Cr 3+ and Fe 3+ ) metal ions (5 mM) on protease stability were investigated by pre-incubating L9 T protease for 1 h with each metal cation. The remaining activities were measured at pH 7 and 70°C, and the enzyme activity in the absence of any metal ions was considered 100%.
Substrate specificity. The hydrolysis capacities of L9 T protease towards different protein substrates including azocasein, bovine serum albumin (BSA), casein, collagen and keratin were evaluated. All substrates were prepared with 50 mM Tris-HCl buffer (pH 7) at a final concentration of 20 g/l. Enzymatic activities were measured on each substrate according to standard conditions. The maximum activity was expressed as 100%, corresponding to the best substrate.

Dehairing of Animal Hides
Fresh cowhides, goatskins and rabbit skins were purchased from local farms, and permission was obtained from farmers to use these animal skins for experiments. The obtained animal hides were divided into square shapes of approximately 6 cm × 6 cm by a sharp knife. The small squares of hairy animal skin were rinsed with tap water to remove blood, mud, and insoluble impurities, and then drained at room temperature. Most of the squares were separately placed into flasks containing 100 ml of diluted enzyme solution (600 U) and 3% (w/w) Na 2 S, while the rest was soaked in 100 ml of Tris-HCl buffer (50 mM, pH 7) as a control. Later, all flasks were placed in a constant temperature shaker (38 o C and 150 rpm) for 24 h. After incubation, the skins were taken out, and the potential of L9 T protease for application in the leather industry was appraised by dehairing efficacy and histological examination.
Samples of approximately 1 cm 2 in size were sliced from the goatskins and treated with L9 T protease, Na 2 S, and Tris-HCl buffer. The samples were thoroughly washed and fixed with 40 g/l paraformaldehyde at indoor temperature for 24 h. After dehydration with ethanol, the samples were embedded in paraffin block and cut into slices of 3 μm by a microtome. The slices were stained using Masson's trichrome staining and hematoxylin and eosin (HE), and then the stained slices were observed under a microscope.

Statistical Analysis
All determinations were done in three independent replicates, and the control experiments were carried out under the same conditions. All data were analyzed using OriginPro software (version 8.5), and the results were expressed as mean ± standard deviation (SD).

Genomic Features
The family Bacillaceae was first proposed by Fischer and currently contains more than 100 recognized genera [20], including Ornithinibacillus, Oceanobacillus and Virgibacillus, which are close neighbors in terms of phylogenetic evolution. As depicted in Fig. 1, the species of the genera Ornithinibacillus and Oceanobacillus are intertwined, suggesting that their genomes contain some identical sequences or are highly similar. In the literature, some Oceanobacillus strains have been reported to produce protease [27][28][29], amylase, lipase and carboxymethyl cellulase [30,31]. Thus, Ornithinibacillus species, the twin brother of Oceanobacillus, may also have the ability to secrete enzymes. Additionally, the 3944 coding DNA sequences of strain L9 T obtained by homology analysis were annotated by the NR database. The annotation results revealed that strain L9 T contains at least 25 genes capable of encoding serine protease, glycosidase, amylase, metalloprotease and lipase (Table S3). The diversity of the enzyme genes provides direction and theoretical support for subsequent studies. More excitingly, the hydrolytic circles formed by strain L9 T were clearly observed on milk agar plates, and the protease activity of 60.97 U/ml was detected in tryptic soytone broth (TSB) containing high amounts of NaCl.

Statistical Optimization of Protease Production
Response surface methodology for optimizing experimental design. According to the single-factor experimental results (shown in the Supplementary Material), three significant independent variables, including yeast extract (A), urea (B) and initial pH (C), were selected to determine the optimum level of protease production. Based on the response values of 17 experiments listed in Table S2, a quadratic model for predicting the maximum protease yield (Y) was generated and presented as follows: Table 1 summarizes the variance analysis results of the regression model. The results indicated that the model is significant since it has a high model F-value (= 107.4) and a very low probability value (< 0.0001). Besides, the input variables (A, B, C) and their interaction effects (AC, A 2 , B 2 and C 2 ) were also significant (p-value less than 0.05). Adequate precision measures the ratio of signal to noise, and a ratio > 4 is a necessary prerequisite for a good fit of the model. A ratio of 28.94 obtained from this study demonstrates that the model can be used to navigate the design space. More importantly, most of the variability in the test data was explained by the model, with the correlation coefficient (R 2 ) of 99.28% and adjusted R 2 of 98.36%. These collective results further confirm the   feasibility of this model to predict the production of L9 T protease. The interaction effects and optimum values of a combination of the three independent factors for maximum protease production by O. caprae L9 T were represented by three-dimensional response surface graphs and contour plots (Fig. 2). According to Figs. 2A and 2B, the proteolytic activity first increased and then decreased with increasing levels of yeast extract in the fermentation medium. It can also be seen from Fig. 2B that there is a significant interaction between yeast extract and pH since the contour is elliptical in shape.
Validation of the optimized process conditions. Through analysis of the regression equation, the model predicted that when yeast extract, urea and initial pH were set to 14.3 g/l, 3.8 g/l, and 9, respectively, maximum L9 T protease yield (251.12 U/ml) can be achieved. Then, three repeated experiments were executed under the predicted optimal conditions. The experimental L9 T protease yield was 255.86 ± 0.71 U/ml, which was comparable to the predicted one, confirming the model's authenticity. After statistical optimization, the production of L9 T protease increased by 319.65% when compared with that obtained under the original medium and unoptimized fermentation conditions (60.97 U/ml).

Gel Electrophoresis and Molecular Analysis
As shown in Fig. 3, a single protein band with molecular mass ranging from 20.1-29 kDa was obtained with the enzyme preparation. Zymogram activity staining showed the proteolytic activity as a white band against the blue background of the gel, as a result of the casein hydrolysis. Furthermore, the results from MS analysis confirmed that L9 T protease had multiple peptides with amino acid sequences of TGEEIDKRVTPFSIIG or KIRRHFTN. BLAST result then revealed that these peptides were affiliated to the protein WP_155668210.1 (333 amino acids) of O. caprae L9 T . Based on the NCBI conserved domain analysis, WP_155668210.1 was identified to be a serine protease containing signal peptide (1-24 amino acids), intervening propeptide (25-97 amino acids) and mature peptide (98-333 amino acids). Thus, it is speculated that L9 T protease is the active mature peptide of protein WP_155668210.1, with a molecular weight of 25.9 kDa. In correlation with present study, a surfactant-stable serine protease from Bacillus sp. B001 showed a molecular mass of 28 kDa [32]. Similarly a detergent stable alkaline serine protease named BM1 with a mass of 29 kDa was also reported from Bacillus mojavensis A21 [17].

Characterization of L9 T Protease
Effect of pH, temperature and NaCl on enzymatic activity and stability. The partially purified L9 T protease displayed proteolytic activity within a broad pH range of 4-13 (Fig. 4A), with the maximal activity at a pH of 7. The pH action of L9 T protease is lower than that of some reported serine proteases, including STAP (pH 2-13) from S. koyangensis TN650 [12] and KERUS (pH 2-13) from Brevibacillus brevis US575 [14], but higher than that of AprB (pH 5-13) from Bacillus sp. B001 [32]. In addition, the pH stability profile (Fig. 4B) manifestly showed that L9 T protease was considerably stable in the pH range of 6 to 11, maintaining greater than 80% of original activity after incubation for 1 h. These properties make L9 T protease a good candidate for industrial applications such as use in detergents [33], tanning processes [3] or as a biocontrol agent [34].
The proteolytic activity was recognizable over a wide range of temperatures (30 to 80°C) with optimum activity at 70°C as shown in Fig. 4C. The findings are consistent with the enzyme from N. dassonvillei OK-18 reported by Sharma et al. [11], but higher than protease BM2 produced by B. mojavensis A21 [17], which presented an ideal temperature of 60 o C. Obviously, L9 T protease was highly stable at a temperature range of 30 to 45°C as revealed by the thermal stability profile (Fig. 4D). However, the protease activity decreased to 51.45% of the initial activity after 1 h of incubation at 60°C, and completely vanished after 1 h of incubation at 70-80 o C. Earlier, the serine keratinase of Brevibacillus parabrevis CGMCC 10798 showed about 90% loss of its original activity upon exposure to 70 o C for 1 h.
The effect of NaCl on protease activity was measured in the salinity ranging from 0-220 g/l at pH 7 and 70 o C. As shown in Fig. 5, L9 T protease was active at salinity from 0 to 220 g/l and had an optimum at 20 g/l. Similarly, strains like Bacillus iranensis X5B [6] and Bacillus sp. NPST-AK15 [33] were observed to produce serine protease which had optimum NaCl concentrations of about 57 and 15 g/l, respectively. It was also observed that L9 T protease retained 80.31, 55.23, and 32.49% of its activity at NaCl concentrations of 80, 140, and 220 g/l, respectively, indicating a certain resistance of the protease to high salinity stresses. Notably, salinity stability showed that this protease was stable at all tested NaCl concentrations after 1 h of incubation. Similar results were also reported for the alkaline protease from Bacillus sp. NPST-AK15, where the enzyme showed high stability in the range of 0-200 g/l NaCl. From the above results, L9 T protease is confirmed as a slightly halophilic enzyme, which may be useful for certain biotechnological processes that depend on salinity.
Effect of various metal ions on L9 T protease activity. The effects of various metal ions on the activity of L9 T protease are summarized in Table 2. In the presence of 5 mM Ag + , Ca 2+ , and Sr 2+ , the proteolytic activity significantly increased to 104.46, 104.40, and 120.37%, respectively in comparison to the control. Indeed, calcium  ions are known to improve activity and prevent conformational changes in many serine proteases [12,14,16]. In the same manner, the activity of a metallo-serine keratinase from Streptomyces aureofaciens K13 was enhanced to 109.54% in the presence of 5 mM Sr 2+ [35]. These observations may be explained by the fact that (i) the spatial structure of the protease contains several Sr 2+ binding sites, where Sr 2+ may act as a salt or ion bridge to maintain the structure conformation of the enzyme or to stabilize the binding of the substrate and enzyme complex [36]; (ii) Sr 2+ probably enhances the binding affinity of the substrate (casein) to the active site of protease [37]. In addition, the activation effect of Sr 2+ on L9 T protease is stronger than that of Ca 2+ and Ag + , implying that Sr 2+ is the best inducer of this enzyme at a certain concentration. The concentration of 5 mM of the ions Li + , K + , Ba 2+ , Mg 2+ , Mn 2+ , and Co 2+ resulted in little effect on L9 T protease, while in Fe 2+ , Cu 2+ , Zn 2+ , and Cr 3+ ions there was a moderate inhibition of activity. Similar results were found by Patil and Chaudhari [38], who also observed a slight effect of the metal ions K + , Mn 2+ , and Mg 2+ on the reduction of proteolytic activity (9.2, 2.0, and 3.5%, respectively), as well as severe inhibition of this activity by Cu 2+ and Zn 2+ . However, Fe 3+ strongly inhibited the protease activity, recording 28.55% of the control activity, which may be due to the fact that Fe 3+ readily captures electrons from the enzyme surface through strong oxidation, thus destabilizing the enzyme.
Effect of chemicals on protease activity. The impacts of different organic solvents on L9 T protease were evaluated to inspect its further potential application. As shown in Table 3, L9 T protease was quite stable in the solvents tested, especially at a concentration of 5% (v/v). More interestingly, the protease also exhibited high stability after 1 h incubation with 10% (v/v) benzene, glycerol and n-hexane, with residual activities of 100.76, 99.50, and 95.70%, respectively. A similar stability of serine protease HAOP in benzene and hexane has been reported [39]. However, increasing concentrations of ethanol, isopropanol and methanol caused a gradual decline of L9 T protease activity, which is in accord with some other serine proteases [11,40]. In the present study, the remarkable stability of L9 T protease in the presence of common organic solvents makes it interesting for the synthesis of peptides and esters.
At the same time, the effects of surfactants on the activity of L9 T protease were appraised, and the corresponding results are listed in Table 4. L9 T protease showed excellent stability and compatibility with some nonionic surfactants. In fact, the protease activities were significantly enhanced by Tween 20 and Tween 80, with enzyme activity rates of 163.41 and 115.01% of the control, respectively, at a concentration of 1% (v/v). However, the stimulatory effects of Tweens on serine proteases were not observed by Haddar et al. [17], Suwannaphan et al. [40] and Gegeckas et al. [41]. Moreover, 1% (v/v) of Triton X-100 inhibited the enzyme activity by 10% after 1 h of incubation, which is also observed with the alkaline metalloprotease (7.5% reduction) from Pseudomonas aeruginosa MTCC 7926 [38] and serine proteases (18% reduction) from N. dassonvillei OK-18 [11] and Bacillus sp. C4 SS-2013 [40], while in contrast to the keratinase (increase by 38.16%) derived from S. aureofaciens K13 [35]. L9 T protease was preincubated with different concentrations of DMSO (1, 5 and 10%, v/v) but no constraint was observed, and the enzyme retained 99.94% activity even after 1 h incubation with 10% (v/v) concentration.  Conversely, the strong anionic surfactant SDS at 10 g/l inhibited the protease activity by about 77%, which is in agreement with most previously reported findings of enzyme denaturation and inactivation by SDS [33,40]. Furthermore, H 2 O 2 slightly lessened the protease activity by 11.82%. All these outstanding features ensure that L9 T protease is compatible with certain detergent formulations. As seen in Table 4, the activity of L9 T protease was not markedly affected by 5 mM thiol reagents, including dithiothreitol and β-mercaptoethanol, which may be explained by the fact that sulfhydryl does not directly participate in the catalytic reaction [42]. The results signify that L9 T protease is a thiol-independent enzyme, similar to reported serine protease KERAB [43] and keratinolytic protease KERDZ [42]. The protease retained 30.44 and 49.85% of original activity in the presence of 5 mM chelators EDTA and EGTA, respectively, indicating that L9 T protease is not a metalloprotease but only uses certain cations as stabilizers [32,44]. More importantly, L9 T protease was thoroughly suppressed by PMSF, suggesting that it belongs to the family of serine proteases [16].
Substrate specificity profile of L9 T protease. The activity of L9 T protease towards various substrates is presented in Fig. S4. As seen, the protease showed the highest activity toward casein, followed by azocasein, BSA and keratin. However, no activity was detected on gelatin and collagen. This finding supports the potential candidacy of L9 T protease as a biocatalyst for dehairing in the leather industry, as it lacks collagenase activity and does not damage skin collagen.

Dehairing Performance of L9 T Protease
The dehairing efficacy of the extracellular enzyme from O. caprae L9 T on animal hides was assessed through organoleptic tests and histological analyses. As seen in Fig. 6, both Na 2 S and L9 T protease could effectively remove the hair from cowhides, goatskins and rabbit skins (Figs. 6D-6I); while the control hides, incubated under the same conditions, showed no sign of hair removal (Figs. 6A-6C). Obviously, the enzymatic dehaired pelts were white in color, and showed clean hair pores, with soft texture and smooth grain surface (Figs. 6G-6I); whereas, touchvisual tests revealed that the conventional dehaired pelts were not only yellow or dark brown in color, but also hard and wrinkled (Figs. 6D-6F).
In the traditional dehairing process, Na 2 S dissolved in water produces large amounts of hydroxide, which then destroys or even degrades the hair [45], resulting in the production of toxic gas H 2 S, suspended solids and highly alkaline wastewater. In contrast, as a bioactive catalyst, L9 T protease does not act directly on the hair shafts; instead, it could efficiently and specifically hydrolyze some proteinaceous substances in the hair pores, such as mucin, albumin, glycoprotein and globulin, thereby destroying the bond between the hair shaft and the hair follicle [45,46]. The absence of these connections caused the hair to naturally detach from the skin under the condition of horizontal rotation without the need for other mechanical forces.
Histological studies on cross-sections of goatskins treated with Tris-HCl buffer, Na 2 S and L9 T protease using HE and Masson's trichrome staining are presented in Fig. S5. As shown, the epidermis of the goatskins was completely removed by treatment with Na 2 S and L9 T protease (Figs. S5b, S5c, S5e, S5f) compared to the blank control (Figs. S5a, S5d). The collagen fiber structure of the enzymatically dehaired pelt was more regular and intact (Figs. S5c, S5f) than that of the Na 2 S-treated pelt (Figs. S5b, S5e). In general, in Masson's trichrome staining, collagen and non-collagenous substances appear blue and dark red, respectively. Thus, the results suggest that the enzymatic dehairing could well maintain the inherent collagen component in the dermal structure (Fig. S5f), while Na 2 S could damage some skin collagen (Fig. S5e).
In this study, L9 T protease could completely dehair goatskin and rabbit skin (Figs. 6G, 6I) in 24 h without any chemicals. However, it could not remove some short hairs on cowhide (Fig. 6H), probably because the thickness of cowhide hinders the penetration of enzymes and lacks mechanical pull. It is worth mentioning that microbial proteases with outstanding dehairing ability are stable in alkaline environment, especially between pH 8 and 10 [14,47]. Hence, L9 T protease is noted as meeting this criterion and may be regarded as a promising candidate for dehairing in the leather industry.
In the current work, production, optimization, partial purification and characterization of a novel serine protease from O. caprae L9 T have been reported. Strain L9 T showed the highest protease production capacity (255.86 U/ml) after 72 h of fermentation at 37°C in the optimized medium containing 14.3 g yeast extract, 3.8 g urea, 130 g NaCl, 1 L distilled water and an initial pH of 9. L9 T protease appeared as a single band on SDS-PAGE gel with a molecular mass of 25.9 kDa. The optimal reaction pH and temperature of the protease were 7 and 70 o C, respectively. Additionally, the protease was activated by 20 g/l NaCl and 5 mM metal ions, including Ag + , Ca 2+ and Sr 2+ , and exhibited excellent compatibility with several nonionic surfactants and organic solvents. Further studies have shown that L9 T protease has a perceptible ability to dehair animal hides without any damage. These findings demonstrate that the protease secreted by O. caprae L9 T may be used for various industrial applications.